-
×
1266 & 7463 Small Adjustable Gland Nut Hand Wrench Tool Universal Spanner Fit for Hydraulic Cylinders Most Farm and Construction Equipment
1 × $29.68
Subtotal: $29.68
Engine Air Valve Holder Pressure Pipe M14+M18 Thread to 1/4 NPT & 67605 Valve Spring Compressor Tool Compatible with 4.8 5.3 5.7 6.0 6.2 LS
$39.00
- This Air Tool Hose kit work when replacing valve springs or valve stem seals, pressurizing the cylinder to help hold valves closed with compressed air.
- This tool kit is for 4.8, 5.3, 5.7, 6.0, and 6.2L LS Engines and is a must when it comes time to install a new set of valve springs!
- Pump comes with M14 and M18 Threads to NPT with ball valve air pump quick connector, the inner hole is a 1/4NPT threaded interface. 14mm is the standard spark plug size for most vehicles.
3mirrors Engine Air Valve Holder Pressure Pipe M14+M18 Thread to 1/4 NPT with Ball Valve and 67605 Valve Spring Compressor Tool Compatible with 4.8 5.3 5.7 6.0 6.2 LS
Fitment:
This tool kit Fits For cathedral port LS cylinder heads. Like: LS1, LS6, LS2, LQ4, LQ9, 5.3L, 5.7L, 6.0L, and all the other LS cathedral port variations. Universal for LS Engine!!
(For Example, It will work on any LS engine for Firebird, for Silverado, for Camaro, for GTO, for Trans am, for Corvette, for CTSV, for Sierra, for Tahoe, for Suburban, for Pontiac G8 GT, and more. )
Package:
1X Valve Spring Compressor Kit
1X 10” Hybrid Hose
1X 1/4″ Quick Coupler male plug
1X M14 & M18 Fitting & O-rings
| Weight | 0.5 kg |
|---|---|
| Dimensions | 20 × 15 × 3 cm |
Arabic
Chinese (Simplified)
Dutch
English
French
German
Italian
Portuguese
Russian
Spanish
Kendell Malone –
Get you some of that
Ease of operation.
Used to hold valves up when replacing seals
nicolas harper –
Good tool
Works great, most recently replacing valve springs on a big block Ford
Herman Allen –
Works well, good quality
Needed an adapter to hook my air compressor into an engine cylinder to do a leakdown test and figure out where I was losing compression. It did the job and discovered I have a couple of bad exhaust valves. I’m sure it would work just fine as a valve holder as well. It screwed into the spark plug holes just fine and sealed well. Tube is stiff and seems like good quality. No regerts.
Marvin Portis Wagner –
Did not fit
No matter how much I tried, this would NOT thread into the spark plug hole even though it claimed it would fit my vehicle (2012 Expedition)
Dominic Heim –
Fits
Great
george lopez –
Works great
The tight space I had to work made it difficult to thread in the hose it¡¯s a bit too long though once installed in the spark plug hole it worked great. Maybe a swivel attached at 4¡± after adapter may make it easer to install in tight spaces.
dj mullen –
Good quality with good price
Good quality at good price
ositoloco69 –
Valve spring tool
This tool is simple, robust and gets the job done!
John Barnes –
Wont find better
Perfect all around for the price
Chase Hawkins –
Worked Great
You do need to supply the right connector to hook to your air hose. The rubber was not too stiff which makes it easier to screw in.
tom wiebking –
Worked as described
Easy to use,worked as described, well made,fast shipping
Dakota Whobrey –
The right tool for the job
That tool works just as I hoped it would. It was easy to use and and will be used again. The price was great.
Ryan Richmond –
Does what it’s made for but….
Picked this up to do a valve spring swap on a Hemi. It worked but had an air leak at one end which made the compressor have to cycle on a lot to keep the pressure up. I was stuck and needed it so I made it work but returned for a replacement hose asap. I haven’t used the replacement so I hope the day I need it it will be ok.
anthony anderson –
Good item.
Used it to change out the valve stem seals on my 99 dodge ram 1500 5.9. Works great.
Michael Dixon –
Great value
Worked as expected
Shawn case –
Worked
Did the job I wanted it to do
Jakob Martinson –
Easy to use
Did what it was suppose to do…
Dion Maxwell –
Great product
Worked jus fine easy to use